You wicked man, you've started me thinking now .........................,
You reckon 'ole 2 jags would notice mate?
Tony.
You reckon 'ole 2 jags would notice mate?
Tony.
ZedShed(Midlands).
- Thread starter t-tony
- Start date
You wicked man, you've started me thinking now .........................,
View attachment 175057
You reckon 'ole 2 jags would notice mate?
Tony.
Just the Boss, its a convertible
- Joined
- Oct 26, 2014
- Points
- 181
- Model of Z
- Z4 coupe sport.
Think to buy one from Dyson spares would probably be expensive, but I’ll look 
n the net see if anything else comes close if you haven’t looked already. Wish I was there to help you make this. Thought about a container that would fit in between your garage wall insets. Square down pipe guttering 3-4 together could fit without sticking out too far, could maybe link a few insets. All plastic which you can stick or home weld to get sealed. Just another thought.
Roy.
n the net see if anything else comes close if you haven’t looked already. Wish I was there to help you make this. Thought about a container that would fit in between your garage wall insets. Square down pipe guttering 3-4 together could fit without sticking out too far, could maybe link a few insets. All plastic which you can stick or home weld to get sealed. Just another thought.Roy.
I think I'm getting a good idea for this. I'll get a drawing put together. Cheers fellas.
Tony.
Tony.
Better hoover first
- Joined
- Nov 25, 2012
- Points
- 178
- Location
- Newport, South Wales,UK
- Model of Z
- Z3 M43 1.8 (1999) and Z4 E85 2.0i (2007)
Spurred on by your garage pictures decided it was time to upgrade my lighting, got rid of the old flourescent tubes that I had from work some 20years ago when they had new lighting and replaced with 4ft LED strip lights. Cheap Chinese units off ebay but UK seller so they arrived in a few days. Amazing improvement over the old tubes, ordered 4 more for £28 to complete the upgrade.
Much better light Col, like daylight. Was useful yesterday as our Gary and I made and built a hat, coat and shoe cupboard for one of his customers. Built up his new shop vacc. and tested it out.
Enjoyable day.
Tony.
Enjoyable day.
Tony.
Do you have a link for the ones you bought? Thanks
- Joined
- Nov 25, 2012
- Points
- 178
- Location
- Newport, South Wales,UK
- Model of Z
- Z3 M43 1.8 (1999) and Z4 E85 2.0i (2007)
As to a home made oil drain can with an adjustable drain tube and top funnel catch tray, seeing your gas heater in the garage pictures got me thinking of repurposing and old gas cylinder, shouldnt be too much of a problem to make an extending drain tube and a catch tray on the end of it. Drain tap fitted in the base to decant old oil into used oil container for transprt to the dump for recycling.
- Joined
- Nov 25, 2012
- Points
- 178
- Location
- Newport, South Wales,UK
- Model of Z
- Z3 M43 1.8 (1999) and Z4 E85 2.0i (2007)
LED Strip Lights from ebay here https://www.ebay.co.uk/itm/4Pcs-Dim...rage-Workshop-Ceiling-Panel-Lamp/393167432884
Just took delivery of 4 more to finish my garage off, took 3 days for delivery which included the weekend.
Theyb are very lightweight and easy to fit with the supplied brackets that they clip into, mounted mine on some wooden lengths bolted to the steel roof frames.
Just took delivery of 4 more to finish my garage off, took 3 days for delivery which included the weekend.
Theyb are very lightweight and easy to fit with the supplied brackets that they clip into, mounted mine on some wooden lengths bolted to the steel roof frames.
I'm not buying anything just looking, these are similar to what I have now but with the cover over the LED's and are a lot slimmer.
Made some progress on an oil drainer today.
Waiting on a mate finding me an opaque 5 gallon drum.
Tony.
Waiting on a mate finding me an opaque 5 gallon drum.
Tony.
- Joined
- Nov 25, 2012
- Points
- 178
- Location
- Newport, South Wales,UK
- Model of Z
- Z3 M43 1.8 (1999) and Z4 E85 2.0i (2007)
Been thinking along the same lines myself, was only looking at drain pans on ebay the other evening. I take it the self tappers on the drain pipe stiffens the joints up? Can see the sense in using a decent container that can be used to transport the waste to the tip negating the need to decant into something else. Where did you source the black pipe and joints, not seen them, just white last time I looked.
@colb , hey mate, I got the fittings from B&Q in Lincoln. There are 2 types of fittings, push-in (with "O" rings) or Solvent (glue up) For 40mm ID the push-in is 41mm OD and the solvent type is 43mm OD. I've used "push-in" fittings and I bought a 1M length of the tube here, 1M, Black, Push-in.
At B&Q the 135 deg. elbows were about £1.10 each and the sink plug kit was £5.30. The drain pan was £5.99 on eBay a Silverline item,
www.ebay.co.uk
I used 1/8" pop rivets to secure the joints. I intend to add a thicker piece of plastic to the side of the drum to stiffen it where the tube goes through the side. I'll update that as and when.
Tony.
At B&Q the 135 deg. elbows were about £1.10 each and the sink plug kit was £5.30. The drain pan was £5.99 on eBay a Silverline item,
Silverline 675089 6ltr Oil Drain Pan Plus Tape Measure for sale online | eBay UK
Find many great new & used options and get the best deals for Silverline 675089 6ltr Oil Drain Pan Plus Tape Measure at the best online prices at eBay UK! Free delivery for many products!
I used 1/8" pop rivets to secure the joints. I intend to add a thicker piece of plastic to the side of the drum to stiffen it where the tube goes through the side. I'll update that as and when.
Tony.
- Joined
- Oct 26, 2014
- Points
- 181
- Model of Z
- Z4 coupe sport.
Looking good but will I still be able to miss the pan.
Not if you put the bathroom light on mate ................................
Tony.
ps. I did think about using Grump's drain tray but you know how that went .
Tony.
ps. I did think about using Grump's drain tray but you know how that went .