And so it begins again

2DunnsZ3 said:
what brand on the catback Bozzy
Click to expand...
I think it's a pro flow. Supplied and fitted by custom pipes in Doncaster UK.
WP_20170818_14_45_59_Pro.webp
WP_20170818_14_46_20_Pro.webp
 
2DunnsZ3 said:
I believe someone else had a pic of RamAir earlier
Click to expand...

This is my Ramair on my E85 Z4 3.0i. On this car you can mount it directly at the point of the original air filter intake through the front panel.
024 (3).webp

017 (6).webp


Listen in at 1.52 seconds for the induction noise, that is all induction as I'm running a standard Z4 exhaust, ...... for now.;)

View: https://www.youtube.com/watch?v=QjS5-Uv0PoM


Tony.
 
I can vouch for the lovely noise it makes.
When Tony was behind me on an up hill section of dual carriage way, we were giving it some welly and I could hear it in my zed.
sounds good from the drivers seat as well :whistle:.
 
It does, and even better in real time.

Tony.
 
2DunnsZ3 said:
did that shield come with it Paul
Click to expand...
No mate, piece of aluminium donated by T-Tony. Made a pattern out of cardboard cut the aluminium to pattern drilled a big hole for the induction pipe and fastened to the existing air box bracket and inner wing. Finished off with a £2 piece of trim from E Bay.

It was quite easy really, just as well my fabrication skills are very basic.
 
Also painted one side black to help with the cooling
 
looks great. Isaw Sean was fabbing up a box but I didn't see if he got it done.
 
I started making a heat shield but still need to make a lid for it.
20190203_143554.webp
20190203_143628.webp
20190203_143605.webp
20190203_143613.webp

Bear in mind that both Paul's and mine are Z4s and that they're fairly different under the bonnet from a Z3.

Tony.
 
Paul Rice said:
No mate, piece of aluminium donated by T-Tony. Made a pattern out of cardboard cut the aluminium to pattern drilled a big hole for the induction pipe and fastened to the existing air box bracket and inner wing. Finished off with a £2 piece of trim from E Bay.

It was quite easy really, just as well my fabrication skills are very basic.
Click to expand...
Do you have the link for the knock on mate, I can only find 5m lengths of the small stuff
 
That's not an update! It's just showing off the amazing work you've done with more pictures =))

Keep 'em coming ;)
 
TaffDaddy said:
That's not an update! It's just showing off the amazing work you've done with more pictures =))

Keep 'em coming ;)
Click to expand...
He's not bad is he! Imagine how good he'll be when he's finished his apprenticeship ;)
 
You must log in or register to reply here.
Back
Top