That's good to know, I like the stick on plate, it opens up the grill area. Anyone tried this on a Z3?
From a legal point they should be mounted on a vertical surface not flat on the bonnet.
Tony.
Rebody Z3 to Kobra build thread
From a legal point they should be mounted on a vertical surface not flat on the bonnet.
Tony.
That’s how I understood it Tony. Kit-car forums discuss it quite a bit. It’s a lower penalty to not have a front plate than have one that’s not right colour,spacing, vertical.
So a lot of 7-type kits don’t even bother. I’d rather ruin the look of mine a little and have a legal plate (position, size, spacing).
Attracting the gents in blue is not my bag man.
Dave
So a lot of 7-type kits don’t even bother. I’d rather ruin the look of mine a little and have a legal plate (position, size, spacing).
Attracting the gents in blue is not my bag man.
Dave
I agree Dave, such a shame we have to have them as most cars look so much better without.
Tony.
Tony.
Not quite
'Legally' they have to be mounted
'vertically or, where that is not reasonably practicable, in a position as close to the vertical as is reasonably practicable'
https://www.legislation.gov.uk/uksi/2001/561/part/II/made
Same thing then.
Tony.
Tony.
So you could argue that they can't be mounted where the cooling of the radiator by air is impeded. Might work for a kit car, but not convinced it would work for a Z3. Some early E types had it mounted on the bonnet for this reason though I believe. Best leave be.
nothing in the new MOT check about mounting
https://www.mot-testing.service.gov...dentification-of-the-vehicle.html#section_0.1
https://www.mot-testing.service.gov...dentification-of-the-vehicle.html#section_0.1
Interesting- could be mot pass but the legislation requires it to be vertical?
https://www.legislation.gov.uk/uksi/2001/561/part/II/made
I’m keeping mine vertical. The car looks so crap and dirty I couldn’t get away with a ‘it’s a classic recreation officer’.
I’ve bought a new reg which I will be able to get a bit shorter plate for. When I go through the transfer I’ll see how it fits again.
Good convo chaps
I’ve bought a new reg which I will be able to get a bit shorter plate for. When I go through the transfer I’ll see how it fits again.
Good convo chaps
I really can't see the point in antagonizing the police by putting things on which they need to pull you for Dave.
Not that I don't like those laid flat sticker type plates either. And, now they'll also have the test fail things to check on.
Tony
Not that I don't like those laid flat sticker type plates either. And, now they'll also have the test fail things to check on.
Tony
So Max the dirty Kobra is road legal...... yay !
MOT passed yesterday and only had to adjust the driver headlight height. So pleased.
Still stuff to do.
New steering wheel,
New Cat-back exhaust
Adding seat belt fixing thingies from Jason
Clean interior
Boot prop install
Figure out how to get my spinners onto the steels
Drive it !
Oh and get the heater to chuck out cool air not just hot ...
Good on you it looks great
Thank you. It may be slap-dashbut it is unique. And made by my unskilled hands
Congrats for getting it ready for the road Dave. Now enjoy driving it while the sun shines mate.
Tony.
Tony.
Well done Dave. When I get 5 minutes I will start a thread on mine!!!
Love the "minimalistic" look, bet people give you a wide berth!!
Front plate needs moving though!!!
Front plate needs moving though!!!
Love the "minimalistic" look, bet people give you a wide berth!!
Front plate needs moving though!!!
Thanks Ian and I agree about the front plate. Will drop it lower at least for now.
Dave
So I put the Kobra away before going on holiday first week of July. Then when I got back the project I was being paid for went ballistic and I didn’t get a chance to drive the grubby car until last week again.
I’ve tidied up some of the body work in readiness for some quotes to paint it, colour still to be agreed. Dammit ...
Also fitted a black mesh grill and moved the plates down.
Also during this period I sent off the necessary paperwork to re-register the car. Bought some shorter plates to go with the new reg and been driving it. The summer isn’t done yet !
Here are some pics from today’s ride out to an arboretum in Oxfordshire (cool place).
Dave
I’ve tidied up some of the body work in readiness for some quotes to paint it, colour still to be agreed. Dammit ...
Also fitted a black mesh grill and moved the plates down.
Also during this period I sent off the necessary paperwork to re-register the car. Bought some shorter plates to go with the new reg and been driving it. The summer isn’t done yet !
Here are some pics from today’s ride out to an arboretum in Oxfordshire (cool place).
Dave
