My Z4................... My way.

[Althulas]

Nice to have it back to spec.

 

[Chaz Ricorn]

Great job Tony, bet it feels good to have sorted that one.

 

[Paul Rice]

Just a small tip for the master, take the Eon shopping and leave the Z4 for more important activities

 

[t-tony]

One small matter arose yesterday, when we fitted the new plastic corner section to the N/S under tray/wheel arch liner there was a cable connector left over. We disconnected/reconnected the fog lamp (1), the outside air temp. sensor was removed from the broken piece of the old plastic and fitted into the new and reconnected (2), but this connector was left and we could not see anywhere it could have come from. Everything works as far as I can see. Any ideas Z4 owners?

Tony.

 

[Chaz Ricorn]

Did they ever fit front parking sensors ?

 

[t-tony]

Not as far as I'm aware mate. I have a sneaky feeling that I removed something from under there after I broke the plastic panel. I remember tying up the outside Air temp. sensor at the time.

Tony.

 

[t-tony]

Following on from the front bumper issue I got a new rubber splitter and got it fitted today.

Also had the wheels all off and refreshed the disc hubs and callipers which were ready after a couple of years.

Tony.

 

[andyglym]

Looking good mate, the splitter gives a more aggressive stance

 

[Althulas]

Not bad going Tony the discs have held up well it didn’t seem that long ago that you did them.

 

[t-tony]

They've had a fairly quiet life mate But yeah, time does fly.

Tony.

 

[t-tony]

The very last bit of TLC on the front end done today. The number plate surround took a battering and the plastic was stretched out of shape so with the help of some G cramps, some pieces of flat metal and a heat gun I got it back into shape and looking almost like new. I'm pleased with my efforts.

Tony.

 

[Slam]

Looking very nice indeed

 

[Paul Rice]

Like the splitter.

 

[t-tony]

Cheers Paul. It didn't break the bank either.

Tony

 

[t-tony]

@Bozzy , I have a new "Benny" a little more subtle that the bigger outline one.

Tony.

 

[Bozzy]

@Bozzy , I have a new "Benny" a little more subtle that the bigger outline one.
View attachment 111697

Tony.

Haha looks good Tony, I like it .

 

[Paul Rice]

Cheers Paul. It didn't break the bank either.

Tony

Where from?

 

[t-tony]

Where from?

This one Paul.

https://www.ebay.co.uk/itm/Universal-100-Car-Lip-Skirt-Protector-Front-Bumper-Spoiler-Side-Rubber-Splitter/183878053039?ssPageName=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

I would also buy some of these,

https://www.ebay.co.uk/itm/A2-Stain...hash=item4417907657:m:mweqBCxBbp5T7-16F4aLN2g

Tony.
ps. If you have a "hole punch" use that to make holes for the screws about 5" apart.

 

[Paul Rice]

Thanks Tony bit better than £150 for the one i was looking at!

 

[philiper]

this is the first time I spotted the link to your Z4 progress thread in your signature today! looks great and alot of hours and love gone to the car, well done to you