Alpine White Eaton M62 Build

Re: My 2.8 Alpine White III Progress

Daz3 said:
Think I'm going to do the hardtop anthracite I've seen a silver zed with a black screen surround and a silver hardtop and it looked a bit silly. :D
Click to expand...

Oy, watch it mate........ :-t .

;)
 
Re: My 2.8 Alpine White III Progress

Looking really good now Daz. Bet you cant wait for it to be finished
bill
 
Re: My 2.8 Alpine White III Progress

hard top said:
Daz3 said:
Think I'm going to do the hardtop anthracite I've seen a silver zed with a black screen surround and a silver hardtop and it looked a bit silly. :D
Click to expand...

Oy, watch it mate........ :-t .

;)
Click to expand...

Ooops my bad it wasn't yours that I thought was silly and I won't try and dig a deeper hole, was meant to say not to my taste :D :ymhug:
 
Re: My 2.8 Alpine White III Progress

Got the exhaust all sorted now couple of pics

DSCF7073.jpg


DSCF7074.jpg


The tips are black chrome which I got from MIJ Exhausts :coolsteer)
 
Re: My 2.8 Alpine White III Progress

Keep up the good work daz car looks amazing carn't wait to see it in the flesh tony.
 
Re: My 2.8 Alpine White III Progress

What exhaust setup have you gone for Daz?
 
Re: My 2.8 Alpine White III Progress

Its one I've cobbled together, I had a cat back system made for the 2.8 which I've chopped and joined onto to get going really could do with getting a link pipe made up to remove one of the silencers and give it better flow but it'll do for now until it's MOT'd and on the road.
 
Re: My 2.8 Alpine White III Progress

You just need a set of graphite M wheels then it will be a white version of mine :D

Love the black tip pipes.. ;)
 
Re: My 2.8 Alpine White III Progress

z3cade said:
You just need a set of graphite M wheels then it will be a white version of mine :D

Love the black tip pipes.. ;)
Click to expand...

I wouldn't mind a set but there quite pricey plus I'd have to get another set of tyres as I'm on 18's, and I dont want to copy you too much :D now where did I put that S50 lump and you need some schnitzer splitters on yours btw :))
 
Re: My 2.8 Alpine White III Progress

As you know I want your spoiler.. so they wouldn't look that different then!
Them splitters were on mine so I can say I had them once.. :D

Fancy spraying my M this winter Daz? :-^
 
Re: My 2.8 Alpine White III Progress

Getting closer now, :-ss Daz. What occasion are you planning to unveil it on? :steer2) I think everyone is on tenderhooks waiting to see it! :ymapplause:

Wonder if he is going for smoked tail lights aswell, Liam! :ymdevil:

PS What does BTW stand for? :-\
 
Re: My 2.8 Alpine White III Progress

Will see what you think to mine Liam but yours doesn't need any paint anyway. As for the spoiler it's glued on well so don't think you'll pinch it that easily :D
I'm getting nervous now with all these high expectations I think I may bottle it :-s
Oh yes and btw means by the way ;)
 
Re: My 2.8 Alpine White III Progress

EnthuZiaZT said:
I think everyone is on tenderhooks waiting to see it!
Click to expand...
yep...i check this thread everyday to see how its getting on...cant wait ;)
 
Re: My 2.8 Alpine White III Progress

swamper said:
EnthuZiaZT said:
I think everyone is on tenderhooks waiting to see it!
Click to expand...
yep...i check this thread everyday to see how its getting on...cant wait ;)
Click to expand...

Only daily! I leave it on and just keep hitting the refresh button =))
 
Re: My 2.8 Alpine White III Progress

^^^^ :)) .... to be honest he has got quite a pace on with it
 
Re: My 2.8 Alpine White III Progress

Started finishing the seats off today few pics of progress. Took a while to mask them all out and not so long to spray. They look a lot better than they did which isn't hard really but will have to see how they wear. I decided to apply the black with a sponge but haven't got any pics of that done yet reason being I didn't want to risk the masking tape on the fresh dye.

Before:
DSCF7077.jpg


DSCF7080.jpg


The gear:

DSCF7081.jpg


After:

DSCF7083.jpg


DSCF7084.jpg

As you can see the bolster is still showing a bit of wear and crease lines eventually I'll get them recovered.

DSCF7085.jpg


DSCF7087.jpg


DSCF7089.jpg

Black not done yet just masking removed after doing the blue.

DSCF7090.jpg
 
Re: My 2.8 Alpine White III Progress

They look Awesome mate..

Nice size shed too :ar!
 
You must log in or register to reply here.
Back
Top