Introducing... Smurf!!!

Your new purchase looks excellent - a fine example of a 2.8 - enjoy!
 
@Mnbrennan I've a quick question for you mate.

When you removed the Amber lens did you replace it with a clear one or fit the unit back together without a lens.

I was testing it out the other day on an old headlight that I removed from my other z3 and everything came off very easily but it looks odd without a lens.
IMG_20170527_093947.webp

IMG_20170527_093256.webp


Cheers.
 
@Mnbrennan I've a quick question for you mate.

When you removed the Amber lens did you replace it with a clear one or fit the unit back together without a lens.

I was testing it out the other day on an old headlight that I removed from my other z3 and everything came off very easily but it looks odd without a lens.
View attachment 56790
View attachment 56791

Cheers.

It does look odd initially, especially off the car but when I first saw it like this on @Grumpy's car I liked it. It works well on a customised Z like Reggie or Smurf with but on a stock Z you might find it out of place. Not seen it on a light coloured Z before, just pop them in and see how it looks on the car.

You could try smoking the amber lense with laminx or a spray for a darker lense look which I thought about and will probably do one day for a change, can't keep it the same for too long you know!

Sorry for OT!
 
@Mnbrennan I've a quick question for you mate.

When you removed the Amber lens did you replace it with a clear one or fit the unit back together without a lens.

I was testing it out the other day on an old headlight that I removed from my other z3 and everything came off very easily but it looks odd without a lens.
View attachment 56790
View attachment 56791

Cheers.
I saw your steering wheel today at Jack's!
 
@Mnbrennan I've a quick question for you mate.

When you removed the Amber lens did you replace it with a clear one or fit the unit back together without a lens.

I was testing it out the other day on an old headlight that I removed from my other z3 and everything came off very easily but it looks odd without a lens.
View attachment 56790
View attachment 56791

Cheers.
What I would do Faheem, is get some very bright silver paint and an artists brush and paint the black plastic "rings" and then they would blend in more.

Tony.
 
Ah cheers @Mnbrennan good to know it got there safely. :thumbsup: Took almost a week!

@t-tony that's a good idea, I'll give it a go, wouldn't the heat from the light bulbs cause the paint to deteriorate though?
 
Doubt it .

Tony.
 
Had some more parts delivered today. A full extended leather dash, centre console and door cards

20170527_093256.webp
20170527_093300.webp


Today I cleaned and fitted the gaitors and door cards. Much nicer I think!

Before

20170527_185105.webp
20170527_161406.webp
20170527_161406.webp


After

20170527_194413.webp
20170527_194407.webp


I also went to buy some AC Schnitzer Type 3 wheels but we're unfortunately bent
 

Attachments

  • 20170527_093256.webp
    20170527_093256.webp
    72.3 KB · Views: 229
  • 20170527_093300.webp
    20170527_093300.webp
    73.9 KB · Views: 235
I don't think @Southernboy has any left but he may do another run if you ask him @Mnbrennan! If not I have one that needs polishing that I was going to do until Barry did me an anodized black one, which is gorgeous by the way. If I have the time I could possibly polish it for you if you wanted!! JIM
 
Had some more parts delivered today. A full extended leather dash, centre console and door cards...

...I also went to buy some AC Schnitzer Type 3 wheels but we're unfortunately bent

Could the alloys have been straightened or were they too far gone?
 
Interior is looking great Martin. Your poor coupe isn't getting a look in!
 
Stacey almost has her kitchen back then martin.
Panels look even better in the car mate.
Thx for your help yesterday
 
I do have a couple of gearshift trims available........... Actually just listed them on eBay. Let me know if you're interested Martin.
HPIM1888.webp
 
Back
Top