SOLD Z3 OEM wind deflector

[Alan W]

In very good condition.. these were an optional extra sold by dealers.. be warned, they made two sizes.. deflectors were same size but the fitting posts were different distances apart, this one measures 755mm outside edge of post to outside edge of post.. you will also have to ensure you have the mounts which the posts fit into.. £40 plus postage by hermes

 

[Iamjonw]

Hi Alan, I may be interested, but I am not clear how this fits to the car? I have a 98 2.8 without any roll over hoops. On the rear bulkhead in front of the roof, there are two plastic turrets, with what looks like circular holes/caps. Does this locate there or somewhere else, is this where the mounts would be?

 

[Alan W]

Hi there needs to be two holes on the top of the bulkhead and on underside there should be two brackets.. basically the two posts on the bottom if deflector go through holes in bulkhead then click into brackets underneath? Hope that helps

 

[Iamjonw]

OK, thank, I'll take a look. Do you have any pictures of it in situ?

 

[Alan W]

No sorry

 

[Nodzed]

Hi Alan, I may be interested, but I am not clear how this fits to the car? I have a 98 2.8 without any roll over hoops. On the rear bulkhead in front of the roof, there are two plastic turrets, with what looks like circular holes/caps. Does this locate there or somewhere else, is this where the mounts would be?

@Iamjonw

Jon - Assuming this is the same one (without roll over) these are the bits you need

 

[Alan W]

Thanks @Nodzed so what l have is parts 1 & 2 the complete deflector unit and soft case, so you have to see if part 7 (two of them L & R) are lurkkng under the plastic bulkhead

 

[Nodzed]

so you have to see if part 7

Part 6 L&R 7 is a hex nut

 

[Alan W]

My mistake, 6 is the bracket (part nos shown for L&R side) and 7 is the bolt to fit the bracket

 

[Iamjonw]

Thanks Niall/Alan. I am guessing they wont be there, will try and take a look at the weekend. Planning to be down at the ZedShed with biscuits

 

[Nodzed]

Thanks Niall/Alan. I am guessing they wont be there, will try and take a look at the weekend. Planning to be down at the ZedShed with biscuits

Sorry shed is closed this sat as the site is operationally open.

 

[Henrik]

In very good condition.. these were an optional extra sold by dealers.. be warned, they made two sizes.. deflectors were same size but the fitting posts were different distances apart, this one measures 755mm outside edge of post to outside edge of post.. you will also have to ensure you have the mounts which the posts fit into.. £40 plus postage by hermesView attachment 180801View attachment 180803

I I' m interested. If is still for sale, I want it

 

[Iamjonw]

Sorry shed is closed this sat as the site is operationally open.

Oh, never mind, but thanks for the heads up. I have a few little jobs to do, so will pootle along in my home garage. Oh and I will eat the biscuits
Hope to see you soon, still need to return your stereo puller tools.

 

[Alan W]

I I' m interested. If is still for sale, I want it

First come first serve.. PM me

 

[Alan W]

Sold