Rear camber adjusment

[Frank Redman]

Hi Recently fitted Eiback pro springs. Rear camber needs adjusting. Is this possible or do I have to fit aftermarket adjustable bushes?

 

[Nodzed]

Sorry, no adjustment on OEM setup

 

[Frank Redman]

Ment to mention vehicle is a 6cyl z3. Cheers

 

[Frank Redman]

Sorry, no adjustment on OEM setup

Thanks for reply.

 

[NZ00Z3]

You either fit adjustable trailing arm bushings which only give a small amount of adjustment or you weld in adjustment plates to the sub-frame which give you more adjustment. Either way the sub-frame has to come out.

Link to sample weld in plates mod
https://www.bimmerworld.com/Suspens...m-Camber-Toe-Adjustment-Kit-E30-Z3-318ti.html

 

[Frank Redman]

You either fit adjustable trailing arm bushings which only give a small amount of adjustment or you weld in adjustment plates to the sub-frame which give you more adjustment. Either way the sub-frame has to come out.

Link to sample weld in plates mod
https://www.bimmerworld.com/Suspens...m-Camber-Toe-Adjustment-Kit-E30-Z3-318ti.html

Hi Thanks for the info. Will have a rethink on my next steps of the build. Great to see you in NZ. From a fellow Kiwi here in Uk

 

[Cooper]

I installed the weld in kit on my 3.0 and am happy with the results. I can also adjust the toe as this will also be changed with the lowering, and you are likely to start chewing out tires.