obd2 location

Hi FRANKIE,

Such an early z3 will not have an OBDII port, you will only find a OBD port under the bonnet.

HTH

Brian
 
Which device are you trying to connect? Does it only have the rectangular connector, as some are supplied with the round connector for the socket in the engine bay.
 
Z3's only came fitted with OBD2 sockets in late '98 where it was placed just underneath the stearing wheel. All the Z3's prior to this were fitted with a round OBD socket under the bonnet which has a screw off protective cap on it. Most diagnostic tools can still read from this soxket but an adapter will be required to connect to it. There are however better scanners than others as some are specifically suited to BMW cars and can read certain things other more generic scanners
Can't do. The best scanners are PC based like Carsoft and INPA which if you do a search there is plenty of info on here.
 
Hi Frankie, whereabouts are you?

I have a scanner and cable to connect to the round 20 pin OBD socket
 
Aceman said:
Z3's only came fitted with OBD2 sockets in late '98 where it was placed just underneath the stearing wheel. All the Z3's prior to this were fitted with a round OBD socket under the bonnet which has a screw off protective cap on it. Most diagnostic tools can still read from this soxket but an adapter will be required to connect to it. There are however better scanners than others as some are specifically suited to BMW cars and can read certain things other more generic scanners
Can't do. The best scanners are PC based like Carsoft and INPA which if you do a search there is plenty of info on here.
Click to expand...
 
Brian H said:
Hi FRANKIE,

Such an early z3 will not have an OBDII port, you will only find a OBD port under the bonnet.

HTH

Brian
Click to expand...
Thanks for the reply, Brian. I have an OBD2 scanner. Other replies have told me that my car only connects with a round connection under the hood. They specified particular types of scanners that I'll have to lool for. Frankie
 
FRANKIE said:
Thanks for the reply, Brian. I have an OBD2 scanner. Other replies have told me that my car only connects with a round connection under the hood. They specified particular types of scanners that I'll have to lool for. Frankie
Click to expand...

@FRANKIE, yes you can only use the round OBD port under the bonnet, I use BM Technic software on my laptop with a choice of either a usb - OBD (round style connector) or OBDII connector. Other member have scanning reset tools hopefully they will be along to advise.
 
You must log in or register to reply here.
Back
Top