I managed to contact Jason via EbayWho also hasn't been on the forum since 28th November.
-
You can only post For Sale adverts once you have been a member for 3 days and made 5 posts elsewhere on the site.
For Sale NEW NEW Stone guards
- Thread starter Davyhoogy
- Start date
Got a link Geoff?
I will have a look and let you know HT
Any suggestions were I can get some considering Dave and littlefeller have gone off the forum
For a while
For a while
Some on eBay.
Cheers grumps I’ll have a look
How about a link then clever clogs?
Just looked on eBay and there only one piece
Not two don’t look as good I’ll keep searching
Not two don’t look as good I’ll keep searching
I'm not that clever!How about a link then clever clogs?
Ask if they do both shapes
Charles Perkins
Dedicated Member
Hi folks.
Indeed it would appear Dave is off- line.
Wanted to purchase a (4set) in brushed aluminum to match the wheels on my black Z3, and accompanying spayed side grills.
I wonder if someone can help?
An alternative for me is to seek a member who has purchased from Dave.
Have that member trace the (4set) combo, and send to Vancouver.
I certainly would reimburse all shipping costs, and out of pocket expenses.
My rationale: I like the (4set) I know I can go online and buy the single black ones.However, once I have the shapes as exhibited by Dave, I can go local for finished concept.
For the records I have attempted to contact Dave, and sincerely hope all is well within his camp.
I truly hope I haven’t stepped out of the norm?
Thank you all kindly for your time.
It is always a pleasure to tune in each day.
Keep up the good work!
Charlie.
Vancouver
Indeed it would appear Dave is off- line.
Wanted to purchase a (4set) in brushed aluminum to match the wheels on my black Z3, and accompanying spayed side grills.
I wonder if someone can help?
An alternative for me is to seek a member who has purchased from Dave.
Have that member trace the (4set) combo, and send to Vancouver.
I certainly would reimburse all shipping costs, and out of pocket expenses.
My rationale: I like the (4set) I know I can go online and buy the single black ones.However, once I have the shapes as exhibited by Dave, I can go local for finished concept.
For the records I have attempted to contact Dave, and sincerely hope all is well within his camp.
I truly hope I haven’t stepped out of the norm?
Thank you all kindly for your time.
It is always a pleasure to tune in each day.
Keep up the good work!
Charlie.
Vancouver
Charles, it's perfectly fine what you are asking. @Althulas did the very same for me when I first joined the forum in 2014. I'm sure someone will be happy to help and the cost will only be air mail letter rates.
I have sent him a PM Geoff
Geoff, I have sent him several PM's with no response since December. Like you I hope all is well with him.
I am now faced with writing off the money and starting again or being patient to see whether he resurfaces.
I am now faced with writing off the money and starting again or being patient to see whether he resurfaces.
He would not take the money and not send something is very wrong I hope that he is well does anybody live near him who might be able to find out ??
Hi
I have contacted another member who has his mobile number and will give him a nudge
He was due to collect his but has not got round to it
So fingers crossed we will hear soon
Regards
Geoff
The add on EBay is possibly LitterFeller (Jason) who also makes the two bit set, I bought sets for both sides in December. Geoff
Thanks Geoff I’ve found his advert and sent him
A message so I’ll wait and see
Cheers marv
A message so I’ll wait and see
Cheers marv
I made the 4 set originally and they where copied later and Dave started making them.
Easiest way to make the templates is to use a couple of layers of masking tape on the body where they fit and draw the shape you are happy with remove the tape from the body ,stick it to cardboard and cut it out.
Give it ago
The magnetic part is industrial grade magnetic material and you cover them with any colour film you like.
Easiest way to make the templates is to use a couple of layers of masking tape on the body where they fit and draw the shape you are happy with remove the tape from the body ,stick it to cardboard and cut it out.
Give it ago
The magnetic part is industrial grade magnetic material and you cover them with any colour film you like.
Charles Perkins
Dedicated Member
Would you be prepared to send a copy of the shapes over to me in Vancouver.I made the 4 set originally and they where copied later and Dave started making them.
Easiest way to make the templates is to use a couple of layers of masking tape on the body where they fit and draw the shape you are happy with remove the tape from the body ,stick it to cardboard and cut it out.
Give it ago
The magnetic part is industrial grade magnetic material and you cover them with any colour film you like.
I would be more than willing to compensate for all your expenses.
Charlie