H&R ARB's won't adjust to the inner (harder) setting (front & rear)

I suppose you can use those on both settings as the head can turn.
The diagram also shows the head should be straight.
This will not be the case....that the reason why the normal one does fit, right.

After looking a second time.
At the bottom it would only use half of the mounting bracket.
Don't think that is a good idea.
It's better like it is, going thru and thru.
 
the standard head would not turn enough and would hit the metal frame below. Anyway , I will keep them on the outer settings for a while now I have the B6's fitted
 
Strange that they sell it as an 2 point ARB and that you need to change parts and connection points to get it in the second position.
 
agree! they should explain more clearly
 
You must log in or register to reply here.
Back
Top