So here's what arrived at work yesterday and upon a close examination I found the lower chrome spoke cover was broken where the securing screw lugs were broken off.
So, for a start I super glued them back in their relevant positions and left to set. Next I mixed up some epoxy adhesive and used this to reinforce the screw lugs.
Next, a check of the wiring and plugs to make sure all appears well.
And then reift the chrome trim to make sure it still fits ok.
Last but not least I took off the lower wheel cover as it was fairly grotty and took it inside for a good clean before refitting it to the wheel.
All I need now is to get in the queue and speak to Jack.
Tony.