Reggie is at the quacks.

Grumps

Always happy, apart from when I'm not 🤬
Supporter
British Zeds
Joined
Apr 27, 2014
Points
226
Location
Forest Town, Mansfield
Model of Z
Z4 e85 2.5i
Cars been running like a dead pig for weeks now. Went to @Jjim and his code reader came up the crankshaft sensor so I replaced it with the premium brand one from ECP. No change so assuming it was a bad one got a genuine one from BMW along with a new adaptor lead and still no change. Code reader is still throwing up crankshaft sensor so i've given up and taken it to an Indy who has been recommended by my new neighbour who has an e46 M3. Fingers crossed it won't be anything to major. Need it right for Sunday as we have a very important engagement ;)
 
I changed the crank sensor first on my Z3 Dave, then the inlet cam sensor.
Hope it's a simple cheap fix for you bud.

Tony.
 
Good luck mate, hope it's an easy and cheap fix.
 
Hope it’s an easy fix :thumbsup:
 
Good luck with Reggie :p
Hope it's not too expensive for you :)
 
In my (former) line of work the words premium and ECP were rarely to be found in the same sentence. :whistle:
 
Hope Reggie is better soon Dave:thumbsup:
 
In my (former) line of work the words premium and ECP were rarely to be found in the same sentence. :whistle:
Well yes I know what you mean Gail but it was their premium part over their basic one.
 
As you've seen in the past mate the one I fitted was a Bosch one with their logo ground off. A genuine part in other words.

Tony.
 
As you've seen in the past mate the one I fitted was a Bosch one with their logo ground off. A genuine part in other words.

Tony.
The ECP one was a delphi?? I think mate. Maybe the brain needs telling the car has a new sensor?? I haven't a Scooby just clutching at straws.
 
Fingers crossed it's a cheap fix. If Tony has done his he would know if it needed to be told it had a new one.
 
All I had to do was clear the code and that was it. Ran so much better than it had since I bought the car.

Tony.
 
Best wishes to Reggie , get well soon
 
@Grumps any news yet mate?

Tony.
 
Back
Top