Not sure about E90 but the E46 calipers bolt straight on. I have a set of front calipers from a E46 330 on my Z3 2.8. Needs a minimum of 18” wheels though to fit over the discs and calipers.
I am now running the E46 330 fronts with 18 inch wheels and there is still a good amount of clearance. May depend on the 17 inch wheel if they will fit or not.
E90 M3 discs are 360mm
E46 M3 discs are 345mm
E36 M3 discs are 312mm
I've got a set of E36 M3 brake callipers that I'm going to fit to mine at some point, but they are not a direct bolt on as you will require the E36 M3 knuckle as well.
I would need at best the 312 disc, some sellers seem to quote 315 diameter, but I don't want to go as far as changing knuckles etc so looks like I go for 300mm disc...thank you all for your comments.
Here are my 330I front discs that are 325mm in diameter. Still a good amount of clearance on 18 inch wheels.
I have narrowed the rear so was able to install some 276x19mm vented discs and calipers from a 328i with 38mm pistons.
The 330i parts bolt right in and are very easy. I had to make some brackets for the rear calipers to mount and I could only do it since I had narrowed the rear. Sorry the car is dirty, its winter and it still gets driven as much as I can.
So your calipers etc are straight off an E46 330i ? Seems loads of room round them and my 17's are E36 M3 Evo ones so I assume capable of allowing decent sized discs.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.