Anyone know which wheels these are please?

[dt7734]

Quite fancy a set for my motor....

 

[Geophys]

They look like style 42 to me.

 

[5harp3y]

Not OEM with that dish

 

[Dino D]

They look a lot like the Rondel wheels fitted as option to e39's.
Bloody nice!
http://m.ebay.com/itm/112288958621?_mwBanner=1

 

[dt7734]

Been looking into this and they are indeed an OEM wheel.
Does anyone know the offset and wheel info I need for these to fit my Z3 when I'm looking to buy them?

 

[DaveP]

The following website is excellent.

It provides info on what your wheel size and offsets are from factory here :
https://www.wheel-size.com/size/bmw/z3/2000/#trim-28i-eudm

And this view lets you compare your present set up vs new parameters. I have used it a lot trying to assess non-OEM options.
https://www.wheel-size.com/calc/?wh...50-17X8ET46&fcl=30mm&scl=40mm&wcl=30mm&sr=0mm

Hope this helps

Dave

 

[Gundun]

I also thought to Rondell 0058, I have no knowledge of them being fitter OEM on the E39 at some point but it might be.
If that's the case you might be looking at an ET20 8J for the front and ET26 9J for the rear, if I am right and they are ROD wheels the it's ET13 8,5J at the front and ET15 10J !!! at the rear.

Having the facelift you will be totally fine at the rear, with about 20mm of extra stickout, but they will not fit at the front, unless you want to go outlaw and possibly install some limiter for the steering.

 

[dt7734]

I also thought to Rondell 0058, I have no knowledge of them being fitter OEM on the E39 at some point but it might be.
If that's the case you might be looking at an ET20 8J for the front and ET26 9J for the rear, if I am right and they are ROD wheels the it's ET13 8,5J at the front and ET15 10J !!! at the rear.

Having the facelift you will be totally fine at the rear, with about 20mm of extra stickout, but they will not fit at the front, unless you want to go outlaw and possibly install some limiter for the steering.

Thanks for the info guys
The info on the wheels i'm interested reads:
17 inch, 5x120 pattern, 8,5J all 4 offset 13
Do you think they will fit mine?

 

[Antm72]

Off set on a z3 front no less than at 35 at that width and that may protrude a little @13 they will stick out way to much at the front unfortunately

 

[dt7734]

Off set on a z3 front no less than at 35 at that width and that may protrude a little @13 they will stick out way to much at the front unfortunately

Ok-Thanks

 

[5harp3y]

serious poke on the front with that size

 

[dt7734]

serious poke on the front with that size

If the wheels stick out beyond the front arches I guess it will look hideous and probably illegal.

 

[5harp3y]

yes to both

backs would fit

 

[Bigtoe]

Quite fancy a set for my motor....

me too

 

[abh29]

A lot of wheel info listed hear,

http://felgenkatalog.auto-treff.com/

 

[98z3]

If the wheels stick out beyond the front arches I guess it will look hideous and probably illegal.

...and dangerous.

 

[t-tony]

...and dangerous.

If it doesn't stick out further than the mirrors, does it really matter?

Tony.