z3 roadster error codes

[saKKARANZ]

hi
just had my car scanned and had the follow ing error codes can anyone tell me where to find a site that explains whats these codes actually mean ?

ASC MK20 AUTO STABILITY CONTROL FAULT 3 (0469)

113 ASC pump motor

MRS multi reset system III/IV fault 1 (08)

kom instrement cluster CAN fault 5 (90)

zke control body electric fault 4


thanks in advance

 

[mrscalex]

The pump motor fault (and probably the ASC fault) is usually a failed electronics module on the ABS pump. It's rarely the pump itself.

MRS=airbag system. I struggle with having a full list of SRS codes but I **think** error 08 might be a side air bag. Do you have side airbags?

The cluster error and ZKE are probably lower priority than these first two.

 

[Shelly]

Hi and welcome to ZroadSter

 

[NZ00Z3]

Hi

Welcome

Attached is a file on the ABS pump problem. If you choose to replace the unit you only need to replace the electronics box and have it coded. The software for coding the unit comes with the INPA software in the above link. Its not hard to do, I've done it once now without problems.

The airbag fault should come with information on which component of the system is the problem. I'm not familiar with "Code 08".

If you are anywhere near Timaru, given me a shout and I can run my scanner over your car to get more information.

Hope that helps

Regards

Murray

 

[ktnez99]

The pump motor fault (and probably the ASC fault) is usually a failed electronics module on the ABS pump. It's rarely the pump itself.

MRS=airbag system. I struggle with having a full list of SRS codes but I **think** error 08 might be a side air bag. Do you have side airbags?

The cluster error and ZKE are probably lower priority than these first two.

My car’s abs unit went. I had to have it replaced.

 

[t-tony]

My car’s abs unit went. I had to have it replaced.

But, knowing what you know now, you didn't. That's the beauty of belonging to a forum such as this.

Tony.

 

[ktnez99]

But, knowing what you know now, you didn't. That's the beauty of belonging to a forum such as this.

Tony.

You have a point @t-tony. I have the original abs unit.

 

[Mint]

If you can take @Murray Wall up on his offer of help. He's a very helpful and knowledgeable chap. We met up on one of our trips to NZ. He even let me drive his 3.0.

 

[Jack Ratt]

A big belated "Hello" from me