Z3 E36 1.9 Cold induction kit

oldcarman

Zorg Guru (V)
Supporter
Canadian Zeds
The M44 Massive
Joined
Feb 11, 2014
Points
188
Location
Pine Falls Manitoba can.
Model of Z
1.9 M44
According to one of the members this is the best system on the market! He researched several different brands and did charting to show the difference of one to the others. Not sure if it's still available. ( His info I mean ) JIM
 

GazHyde

Administrator
Administrator
Global Moderator
M Power
Joined
Dec 2, 2011
Points
226
Location
Berkshire
Model of Z
Z4 MR
You can put together a kit considerably cheaper than that buying the parts individually off eBay. @5harp3y has some experience of locating the bits for the 2.8 kit he sells, and it's primarily about finding the correct diameter pipes. Not knocking that particular kit, but personally I think £180 is pretty steep for what it will give you.

Pipercross was found to have the better airflow over a selection that was checked out by a guy called Rich some years back.
 

GazHyde

Administrator
Administrator
Global Moderator
M Power
Joined
Dec 2, 2011
Points
226
Location
Berkshire
Model of Z
Z4 MR

GazHyde

Administrator
Administrator
Global Moderator
M Power
Joined
Dec 2, 2011
Points
226
Location
Berkshire
Model of Z
Z4 MR

littlefeller

Zorg Guru (IV)
British Zeds
The M44 Massive
Joined
Oct 18, 2015
Points
168
Location
evesham
dont use ribbed pipe like in the pic, they cause turbulence in the air flow, ideally needs to be smooth or preferably slightly tapered getting smaller as it goes towards the engine. though this is really only relevant for high performance engines tuned to the t*ts, but hey it cant hurt as the gains from the air intake will be very small, but the sound more than makes up for it.
having said this, can something that flows more air trap as much crap:confused: i dont think so (only my personal opinion, but i would do it just for the sound=))).
 
Top