Wide body parts question.....

dva99999

Zorg Guru (I)
Supporter
British Zeds
Joined
Feb 14, 2016
Points
85
Location
Wirral
Model of Z
Unfortunately gone
Can anyone give me some advice. I have a 98 Arctic Silver wide body Zed which needs front bumper and splitter and rear bumper.

Do bumpers from a standard body fit or will I need to get different parts.

If so, who does them?

Thanks
 

spurs fan in a coupe

Zorg Guru (V)
Supporter
3rd Party Trader
Joined
Dec 5, 2011
Points
175
Can anyone give me some advice. I have a 98 Arctic Silver wide body Zed which needs front bumper and splitter and rear bumper.

Do bumpers from a standard body fit or will I need to get different parts.

If so, who does them?

Thanks
Front bumpers are the same on all the Z3 range early 1.9, through 3.2 to late 3.0s.

Rears are different depending on wide or narrow body rear wings.

I have sport front bumpers, an ///M front bumper and various others.

I have some rear bumpers too, would have to check if I have a wide rear one. To be honest you'll be lucky to source a second hand one in Artic in pristine condition, but it may be possible. They will all be about 18 years old at least by now..
 

dva99999

Zorg Guru (I)
Supporter
British Zeds
Joined
Feb 14, 2016
Points
85
Location
Wirral
Model of Z
Unfortunately gone
Front bumpers are the same on all the Z3 range early 1.9, through 3.2 to late 3.0s.

Rears are different depending on wide or narrow body rear wings.

I have sport front bumpers, an ///M front bumper and various others.

I have some rear bumpers too, would have to check if I have a wide rear one. To be honest you'll be lucky to source a second hand one in Artic in pristine condition, but it may be possible. They will all be about 18 years old at least by now..
Thanks for that. I'm aware that pristine second hand ones will be difficult to get hold of. The rear (wide body) has a few chips and scrapes, but the front especially the spoiler has obviously hit a speed bump, so there is nasty scrape with a small piece hanging off. It's never bothered me, but I'm going to be doing some work on it and the bodywork let's it down a bit.
Let me know if you do have a spare...
Thank you
 

Sean d

Zorg Expert (I)
Supporter
British Zeds
Joined
Sep 29, 2015
Points
201
Location
Lincolnshire
Model of Z
Z3 2.8
Thanks for that. I'm aware that pristine second hand ones will be difficult to get hold of. The rear (wide body) has a few chips and scrapes, but the front especially the spoiler has obviously hit a speed bump, so there is nasty scrape with a small piece hanging off. It's never bothered me, but I'm going to be doing some work on it and the bodywork let's it down a bit.
Let me know if you do have a spare...
Thank you
The early 1.9s are not wide mouth and are quite obvious
 

Ianmc

Zorg Guru (IV)
British Zeds
The M44 Massive
Joined
Oct 12, 2014
Points
165
Location
New Forest
Model of Z
Z3 (M44)
The early 1.9 doesn't have separate side lights, therefore no holes.
 

Antm72

Zorg Expert (II)
Supporter
British Zeds
Joined
May 4, 2015
Points
246
Location
South Yorkshire
Model of Z
2.8
Can anyone give me some advice. I have a 98 Arctic Silver wide body Zed which needs front bumper and splitter and rear bumper.

Do bumpers from a standard body fit or will I need to get different parts.


If so, who does them?

Thanks
@Dino D has all the parts you need in the for sale section off his 2.8 :thumbsup:
 
Top