Tyre problem

mwpe

Zorg Guru (V)
Supporter
Joined
Dec 8, 2011
Points
178
Location
Camberley
Model of Z
3.0
I took my E46 compact for it's MOT and was It failed due to a cut on inner side of the offside rear tyre. Not too concerned as this was something i would not see, I took the car home and ordered a new tyre, to be fitted tomorrow. I then thought that I should check on the damage. I couldn't see anything just looking underneath so I took the wheel off and was surprised to see this.
IMGP2778.JPG

IMGP2780.JPG


No idea what could have caused it. The tyre is about 2 years old and less than half worn.
 

Jack Ratt

Zorg Expert (I)
Supporter
British Zeds
The West Country
Joined
Dec 3, 2013
Points
200
Location
TRURO, CORNWALL
Model of Z
2.8i AUTO and 2.8i MANUAL
Looks like a manufacturer fault to me from the photo. Take it back to where you bought it for their opinion
 

mwpe

Zorg Guru (V)
Supporter
Joined
Dec 8, 2011
Points
178
Location
Camberley
Model of Z
3.0
Looks like a manufacturer fault to me from the photo. Take it back to where you bought it for their opinion
I agree but I can't find the receipt, I am not as fastidious with my record keeping on the daily as I am with the Zed. It's not a major problem just a reminder to check things a bit more carefully. With the Zed I am always looking at everything.
 

Stevo7682

Zorg Expert (I)
Supporter
The M44 Massive
Scottish Zeds
Joined
Apr 1, 2016
Points
208
Location
Maybole , South Ayrshire
Model of Z
Z3 Individual Dakar / Orinoco Individual
Mike tyre definitely a fail looking at the picture as for its age if you look round the outer sidewall of the tyre you should be able to find the dot code ( 4 digit number)
Thats the week and month the tyre was made
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
Being picky but that isn't a cut, so failed for wrong criteria anyway. What brand of tyre is it Mike? Usually that sort of failure occurs due to excessively low tyre pressures more than anything else.

Tony.
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
That's really odd, nothing sticking out in the wheel arch?
.
It's not a cut, it's a failure of the tyre structure. A tear in other words.

Tony.
 

pgunter

Zorg Guru (V)
Supporter
British Zeds
#ZedShed
Joined
Aug 15, 2014
Points
185
Location
Winchester
Model of Z
2.2i Sport Zedshed Special
@mwpe speaking with @Oldguysrule we both think you must have been spinning on some sharp blades of grass again.. Come on.. come clear... which field was it this time. =))
 

mwpe

Zorg Guru (V)
Supporter
Joined
Dec 8, 2011
Points
178
Location
Camberley
Model of Z
3.0
Being picky but that isn't a cut, so failed for wrong criteria anyway. What brand of tyre is it Mike? Usually that sort of failure occurs due to excessively low tyre pressures more than anything else.

Tony.
I agree Tony but that tyre has never been more than a couple of pounds down on pressure, they are checked regularly. I think it is just a faulty tyre, shows the use of the MOT though as you would never notice that in normal use and it isn't going to get better. On the Zed, I often get underneath for a good look round but don't tend to do that so much on the workhorse.
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
Often the case Mike and as you point out, part of the value of testing.

Tony.
 

FRANKIE

Zorg Guru (V)
American Zeds
The M44 Massive
Joined
Sep 2, 2013
Points
193
Location
Egg Harbor Township, New Jersey, USA
Model of Z
Z3
Mike tyre definitely a fail looking at the picture as for its age if you look round the outer sidewall of the tyre you should be able to find the dot code ( 4 digit number)
Thats the week and month the tyre was made
Can't say if it's the same over in the UK as in the USA but I believe it's the week and YEAR..eg.....(0915) would be the 9th week of 2015................Frankie
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
Likely to be the same Frankie. In fact, straight from the horses mouth. It is !

Tony.
 
Last edited:

mwpe

Zorg Guru (V)
Supporter
Joined
Dec 8, 2011
Points
178
Location
Camberley
Model of Z
3.0
Mike tyre definitely a fail looking at the picture as for its age if you look round the outer sidewall of the tyre you should be able to find the dot code ( 4 digit number)
Thats the week and month the tyre was made
That tyre has gone now, it was replaced today but I will check the date on the other side which was fitted at the same time. I hate changing one tyre as I prefer to keep evenly matched pairs but they are less than half worn.
 

Stevo7682

Zorg Expert (I)
Supporter
The M44 Massive
Scottish Zeds
Joined
Apr 1, 2016
Points
208
Location
Maybole , South Ayrshire
Model of Z
Z3 Individual Dakar / Orinoco Individual
That tyre has gone now, it was replaced today but I will check the date on the other side which was fitted at the same time. I hate changing one tyre as I prefer to keep evenly matched pairs but they are less than half worn.
There is a fair chance the dates will be similar on both tyres Mike .
But not necessarily as if they came off a tyre rack in a tyre fitting center somewhere they may not be the same age as 1 could have been on the rack for a bit and the 1 beside it could have been recently delivered but if they were ordered in for you more likely to have the same or very similar date codes
Stephen.
 

t-tony

Zorg Expert (II)
Supporter
British Zeds
#ZedShed
Joined
Dec 31, 2013
Points
226
Location
Torksey Lock,Lincoln, England
Model of Z
E89 Z4 23i Auto
pot hole? deep enough to rub the edge off, against the tarmac edge?[/QUOTE

It's possible Pete, but would have to have happened on more than one occasion I think because it's almost 1/4 of the tyre?

Tony.
 

mwpe

Zorg Guru (V)
Supporter
Joined
Dec 8, 2011
Points
178
Location
Camberley
Model of Z
3.0
If you look closely, it is definitely not impact dmage but structural failure.
 
Top