- Joined
- Oct 3, 2022
- Points
- 24
- Model of Z
- Z3
Good to know that it actually works I’m happy to disable my cig lighter as I don’t have a need to use it hahaI fitted an oblong usb socket with an integral voltmeter display in a spare position I had on the front centre console tapping into the power cable for the Cig lighter. Found this one on ebay listed you may have to trim the switch panel to get it fitted. Run a power and ground wire along the centre to tap into the Cig lighter. This one has a cover as protection against rain.
![]()
12V Dual USB Charger Socket LED Voltage Voltmeter Rocker Switch Panel Car Boat E | eBay
8 Gang RGB Switch Panel LED Light Bar Electronic Relay System Boat Car ATV SUV. Wireless RGB 12Gang Switch Panel LED Light Bar Bluetooth Electronic Relay System. 7COLORS LED AIRCRAFT STROBE LIGHTS USB CHARGING MOTORBIKE MODIFIED WARNING LIGHT.www.ebay.co.uk
Picture of what I fitted to mine
Have you got a picture ?Took my fag lighter out and fitted a double USB socket in there, had to fit an on/off switch in line as otherwise the socket is permanently live.
Yeah only want it to be charging my phone don’t need it for the radio or anything that is why I thought on the rear switch panel as it would look cleanProbably not, did it several years ago. Imagine a Z3 cigarette lighter hole with one of these in it.
There are similar sockets out there nowadays with built-in voltmeters that I would fit these days, on account of numbers are always good.![]()
12V Car Cigarette Lighter Socket Dual 2.1A USB Port Charger Power Outlet LED UK | eBay
Working Temperature: Min. -20 Celsius Degree, Max. 80 Celsius Degree. LED Color: Green / Blue / Red. The word of Mouth is very important to us, and your kindness and understand are ap precia t ed.www.ebay.co.uk
Edit: And then someone else says much the same thing while I was typing. Damn.
Yeah couple options I could use through the cigarette lighter which would probably be the easy option but would ideally want in my rear switch panel if I canLoads of round type usb with voltmeter on ebay so if you want to replace the cig lighter you should find a suitable one with the rubber flap cover, I fitted one in the dash on my Z4
Like the idea of it being thereYeah couple options I could use through the cigarette lighter which would probably be the easy option but would ideally want in my rear switch panel if I can
Yeah same think it will be good place for itLike the idea of it being there