One Thing After Another

[ZTec]

Thought I'd take the Zed for a spin after vacumning and washing it. Tried to lower the passenger seat, lo and behold damn thing wouldn't move, could hear the motor clicking but no movement of the seat. In the photos there's a shaft in a black plastic sleeve that runs from the motor to the gearbox, that moves up and down as I select up and down. Any ideas?????

 

[GazHyde]

Sometimes a bit of a whack on the motor can get them going again. The shaft wont be the issue in this case. Check and make sure something hasn't got wedged somewhere underneath the seat.

 

[ZTec]

Sometimes a bit of a whack on the motor can get them going again. The shaft wont be the issue in this case. Check and make sure something hasn't got wedged somewhere underneath the seat.

Hi Gaz, yes checked for anything that might have jammed the seat, it move back and forth easily enough. Might have to take the seat out as the gearbox is slightly loose.