mariolambrette
Newbie
- Joined
- Sep 12, 2022
- Points
- 1
Hi everyone,
The short story is that I'm after a pinout for the x20 connector from a 1999 1.9l z3 and a 1997 2.8.
The background is that I'm swapping an M52 into my 1.9 z3 (Just buy a 2.8, I know, but it's been a long journey to this point
), and I'm not getting any cranking when trying to start the car. My ECU has an EWS delete, so I've ruled that out, and I've checked all the grounds, and they look good. I'm new to z3s having worked on e36s previously, and I've found that the x20 pinout on the z3 is different (or at least the wires are different colours) so I'd like a pinout diagram to help check the wiring. I've found pinouts for e36s but nothing z3 specific, so help would be massively appreciated.
Also, if any one has any other ideas for why I'm getting no cranking that would be much appreciated.
Thanks in advance!
The short story is that I'm after a pinout for the x20 connector from a 1999 1.9l z3 and a 1997 2.8.
The background is that I'm swapping an M52 into my 1.9 z3 (Just buy a 2.8, I know, but it's been a long journey to this point
), and I'm not getting any cranking when trying to start the car. My ECU has an EWS delete, so I've ruled that out, and I've checked all the grounds, and they look good. I'm new to z3s having worked on e36s previously, and I've found that the x20 pinout on the z3 is different (or at least the wires are different colours) so I'd like a pinout diagram to help check the wiring. I've found pinouts for e36s but nothing z3 specific, so help would be massively appreciated.Also, if any one has any other ideas for why I'm getting no cranking that would be much appreciated.
Thanks in advance!
