#ZedShed Kai’s 2.8 road to recovery

Ahhh….Newness. Car looking all the better for it. Another job well done.

@Lee with the handbrake cables, do you snip of the little plastic shrouds from the opposite side to what is pictured? Done this job with @Stevo7682 twice now and on both occasions have nibbled them off to get them through the chassis holes and into the "cockpit”.
 
Ahhh….Newness. Car looking all the better for it. Another job well done.

@Lee with the handbrake cables, do you snip of the little plastic shrouds from the opposite side to what is pictured? Done this job with @Stevo7682 twice now and on both occasions have nibbled them off to get them through the chassis holes and into the "cockpit”.

Yeah we cut that plastic sheath off, it's just way too big to fit in the hole. Also some cables we have to trim the head to fit though the arm aswell.
 
I took care of some new bits now as well. New exhaust system, front bumper, wing mirrors, rear callipers, thermostat, intake boot hose, inner&outher tie rods and steering wheel slip ring done. Now I am anticipating winter season to get them trailing arms done, cooling system overhaul and whatever @Lee says need doing 💪🏻
 

Attachments

  • 1365696e3711bcacb2d742a2ea73e3de.webp
    1365696e3711bcacb2d742a2ea73e3de.webp
    75.5 KB · Views: 669
Back
Top