Hi from central Canada!! Good luck finding your parts, I'll keep an eye out for anything that happens to come on listing in Canada!! JIM
There were some folks on the bimmerforums trying to 3D print replacements...Hi Andrew and welcome from snowy Lincoln..
Are the ///M and standard Z3 interiors compatible? @Mnbrennan
Tony.
Welcome to the forum from Egg Harbor Township, New Jersey...............FrankieHello all, a quick introduction. I'm the owner of a '98 M roadster, which I have had under my ownership since about June 2014. The car has has been really well looked after and is living a life of relative luxury in my heated garage at present given the arctic conditions in Scotland at present! I've upgraded the brakes all round with new discs and pads, refurb'ed the alloys, replaced all the suspension on all 4 corners, fixed a leaky roof, fixed the seat bushes and also replaced the VANOS with a new VANOS unit. So, it's been a busy few years! The car performs really well now, is stable in cornering and under acceleration. My project for the last 6 months has been to source a replacement interior part where the switch buttons are for the hood, heated seats etc, as the plastic has broken. I'll probably start a new thread on that and hope someone can help once I explain it fully! Hope to hear from any other Z3 / M fans in Scotland or further afield!