Separate names with a comma.
If you want to join in with the discussion, and see the areas which are available only to members then sign up now!
Discussion in 'Z3 & Z3 M Roadster & Coupé Knowledgebase' started by t-tony, Oct 4, 2014.
t-tony published a new article:
Read more about this article...
good idea there Tony.....might give that a try.
nice man ;-) how did it break in the first place?
I tried to wedge it to stop it pulling too tight. My fault. This is a cheaper strong repair Dave.
it is obviously a common problem, ive had no issues with mine thank god, mind you, the belt does seem slow on retraction, i figured it was the coil spring but it could well be the guide now that you mention it... i was going to WD the coil unit so i will do that and see if it makes a difference ;-)
DON'T do that Dave, pull the belt right out and clean it with brake cleaner,allow to thoroughly dry then spray liberally with silicone spray and see the difference.
haha nice Tony, thanks for the heads up ;-)
Thanks for the write up @t-tony. I've edited it and added to the article system!
Direct link as per first post is - https://zroadster.org/articles/bmw-z3-seat-belt-guide-basic-repair.79/