shantybeater
Dedicated Member
- Joined
- Dec 16, 2011
- Points
- 29
Right well i've decided to commit and sell the M, very tough decision but with enough persuasion from friends/forum members i've decided its the best thing to do.
A few parts (some of which will only be available when they are removed - but please register your interest)
I will say already I have people interested in several items so as promised they will get first refusal -
First off, no introduction needed:
BBS LM's in TUV approved sizes
8.5" fr ET 33/34
10" Rr ET 15/16
The offets are normally ET30 front and rear but thanks to swapping the centers front and back and reverse mounting the rears I have gained a much happier offset on the car
I can't tell you how much work has gone into these in the last month, just have a read:
http://www.zroadster.net/forum/viewtopic.php?f=32&t=27468&start=300
Completely stripped, rebuilt with polished lips and a nice soft silver. I have just applied Gtechniq C5 wheel armour which should hold off the brake dust for at least a year and help prevent the lips from weathering!
They are supplied with:
-BBS lug nuts (longers at the rear)
-H&R 10mm Spacers
-Correct BBS Spigot rings
-New stainless steel valves
-BBS Racetrack (rare) center caps (some minor pitting to them)
- Falken 452 tyres freshly balanced several weeks ago
I will check the level of tread shortly but i believe the fronts are about half worn and the rears will be brand new!
New these cost over £4000,
£2100 - Seems alot but I paid similar for them a year or so back in a tired (but well cared for) condition, keep in mind the cost of spacers, new valves and brand new tyres on the rear i'd say its more than fair. I am also interested in a part exchange for a set of OEM wheels
They will also hold in value (due to being discontinued)
AC Schnitzer flippers - SOLD
AC Schnitzer roll hoops - SOLD
Strong Strut - Front - SOLD
Strong Strut butt strut
Over £350 new, £180 delivered
Custom Subwoofer enclosure (Cost £100+), JL Audio 6w3v3 subwoofer (Cost £100+), JL audio 300/4 (Cost £200+), Focal 130KP front components (Cost £150+), Pioneer Headunit DEH-6700MP (Cost £60~)with matching orange backlight color scheme
£350 for the lot..
Eisenmann sport Tailpipes
Again no introduction,
Great condition, around £1400 new
£550
Retrofit Bi-xenon Headlights
A big project of mine, hard to put a price on them since the sheer amount of man hours i've put into them:
http://www.zroadster.net/forum/viewtopic.php?f=32&t=27468&start=200 - bottom of page and onto the next
They owe me £200 for the headlights plus over another £250 just in parts
The complete solution is thrown in here, well and truly plug and play with OEM style connectors:
- Wiring harness
- Morimoto 3way ballasts
- Morimoto 3way D2S 4300K 35w Bulbs
- RHD FXR 1.1 Projectors (Bi-xenon)
- HID ballasts
£500 posted, I will even fit for free if you collect!
Please bare in mind these currently pass MOT laws at my station although other examiners may not - its a thin line due to lack of auto-adjusting. Also there is very little room for adjustment so you need to do the majority on the car with the mounts (they are made to screw up and down)
All parts are price negiotiable depending on level of interest....
A few parts (some of which will only be available when they are removed - but please register your interest)
I will say already I have people interested in several items so as promised they will get first refusal -
First off, no introduction needed:
BBS LM's in TUV approved sizes
8.5" fr ET 33/34
10" Rr ET 15/16
The offets are normally ET30 front and rear but thanks to swapping the centers front and back and reverse mounting the rears I have gained a much happier offset on the car
I can't tell you how much work has gone into these in the last month, just have a read:
http://www.zroadster.net/forum/viewtopic.php?f=32&t=27468&start=300
Completely stripped, rebuilt with polished lips and a nice soft silver. I have just applied Gtechniq C5 wheel armour which should hold off the brake dust for at least a year and help prevent the lips from weathering!
They are supplied with:
-BBS lug nuts (longers at the rear)
-H&R 10mm Spacers
-Correct BBS Spigot rings
-New stainless steel valves
-BBS Racetrack (rare) center caps (some minor pitting to them)
- Falken 452 tyres freshly balanced several weeks ago
I will check the level of tread shortly but i believe the fronts are about half worn and the rears will be brand new!
New these cost over £4000,
£2100 - Seems alot but I paid similar for them a year or so back in a tired (but well cared for) condition, keep in mind the cost of spacers, new valves and brand new tyres on the rear i'd say its more than fair. I am also interested in a part exchange for a set of OEM wheels
They will also hold in value (due to being discontinued)
AC Schnitzer flippers - SOLD
AC Schnitzer roll hoops - SOLD
Strong Strut - Front - SOLD
Strong Strut butt strut
Over £350 new, £180 delivered
Custom Subwoofer enclosure (Cost £100+), JL Audio 6w3v3 subwoofer (Cost £100+), JL audio 300/4 (Cost £200+), Focal 130KP front components (Cost £150+), Pioneer Headunit DEH-6700MP (Cost £60~)with matching orange backlight color scheme
£350 for the lot..
Eisenmann sport Tailpipes
Again no introduction,
Great condition, around £1400 new
£550
Retrofit Bi-xenon Headlights
A big project of mine, hard to put a price on them since the sheer amount of man hours i've put into them:
http://www.zroadster.net/forum/viewtopic.php?f=32&t=27468&start=200 - bottom of page and onto the next
They owe me £200 for the headlights plus over another £250 just in parts
The complete solution is thrown in here, well and truly plug and play with OEM style connectors:
- Wiring harness
- Morimoto 3way ballasts
- Morimoto 3way D2S 4300K 35w Bulbs
- RHD FXR 1.1 Projectors (Bi-xenon)
- HID ballasts
£500 posted, I will even fit for free if you collect!
Please bare in mind these currently pass MOT laws at my station although other examiners may not - its a thin line due to lack of auto-adjusting. Also there is very little room for adjustment so you need to do the majority on the car with the mounts (they are made to screw up and down)
All parts are price negiotiable depending on level of interest....
