I know it's only a small thing but I lost one of the 11mm nuts that hold the inlet manifold on while I was doing my M54 upgrade, I've found a replacement for now but would like to replace it with an OE, has anyone got one knocking around?
Wanted 11mm nut.
- Thread starter Devon Z
- Start date
same here i had one of these missing
http://www.realoem.com/bmw/enUS/showparts?id=CN52-EUR-08-2000-Z3-BMW-Z3_30i&diagId=11_6228
Item 7 I think, ring Sopers.
Item 7 I think, ring Sopers.
They are about 75p from the dealer. But may stand out a bit from the others as they are bright shiny copper.
Holdup. @mwpe posted a link to the exhaust manifold and it's inlet manifold side required.
http://www.realoem.com/bmw/enUS/showparts?id=CN52-EUR-08-2000-Z3-BMW-Z3_30i&diagId=11_6239
Therefore sounds like part 14 on this diagram instead.
If that's the case they are still about 75p but not copper.
This should be the correct nut for all M52/M54 engines.
http://www.realoem.com/bmw/enUS/showparts?id=CN52-EUR-08-2000-Z3-BMW-Z3_30i&diagId=11_6239
Therefore sounds like part 14 on this diagram instead.
If that's the case they are still about 75p but not copper.
This should be the correct nut for all M52/M54 engines.