1.9 heater hoses

yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
hi everyone, i am in need of some help if posible, thought i had sorted my hose problem after it lost all its water, i re-attached it but its popped off again.i have noticed the reason its come off is because the part the hose fits onto is now too short
i found about 2cm was stuck in the hose.
1.JPG
2.JPG
3.JPG
4.JPG

i have attached some pics.
can anyone identify the part for me and any advice on how to change.
the pics show where the hose comes from [presume its heater]
where the hose goes to [back of engine just above gearbox]
view from left side
and the bit what broke off. [plastic]
hope this all makes sense...help. help please.
 
jonco

jonco

Zorg Guru (IV)
Supporter
British Zeds
The M44 Massive
Joined
Dec 6, 2011
Points
159
Location
Chester
Model of Z
'98 1.9 Auto
yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
jonco said:
Ouch - that's awkward to get at. When i changed my hoses I took the air inlet system off to access connectors - I'll try and find procedure
Your connector is on this diagram http://www.realoem.com/bmw/enUS/showparts?id=CH72-EUR---Z3-BMW-Z3 1.9&diagId=11_1558
Your hoses are on this http://www.realoem.com/bmw/enUS/showparts?id=CH72-EUR---Z3-BMW-Z3 1.9&diagId=11_1567
HTH
Click to expand...
hi, thanks for your time, i dont think my connector is on that diagram, my connector is more of a Y shape with one big hose and a small one.
 
yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
jonco said:
Ouch - that's awkward to get at. When i changed my hoses I took the air inlet system off to access connectors - I'll try and find procedure
Your connector is on this diagram http://www.realoem.com/bmw/enUS/showparts?id=CH72-EUR---Z3-BMW-Z3 1.9&diagId=11_1558
Your hoses are on this http://www.realoem.com/bmw/enUS/showparts?id=CH72-EUR---Z3-BMW-Z3 1.9&diagId=11_1567
HTH
Click to expand...
having studied, i think your hose diagram is correct, mine is part number 12, [the only one without a part number on the list]?
 
jonco

jonco

Zorg Guru (IV)
Supporter
British Zeds
The M44 Massive
Joined
Dec 6, 2011
Points
159
Location
Chester
Model of Z
'98 1.9 Auto
yorky said:
having studied, i think your hose diagram is correct, mine is part number 12, [the only one without a part number on the list]?
Click to expand...
Sorry presumed you had the M44 engine same as mine. Part 12 is greyed out as it is not fitted on that model. If you go to select another car option at top of page and then enter last 7 characters of you VIN - you should get what is fitted on your model.
 
yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
jonco said:
Sorry presumed you had the M44 engine same as mine. Part 12 is greyed out as it is not fitted on that model. If you go to select another car option at top of page and then enter last 7 characters of you VIN - you should get what is fitted on your model.
Click to expand...
confused now, just checked my vin and it is m44 engine, do you not have 2 hoses coming off your connector at the back of the engine, the biggest one going into the bulkhead/dash for the heater? found another m44 pic with the y connector shown clearly with part 12 going to it.
z3 cooling.jpg
 
Brian4

Brian4

Zorg Guru (IV)
British Zeds
East Anglian Crew
Joined
Dec 23, 2011
Points
173
Location
Near Grantham
Model of Z
Z3 3.0i Auto
As @jonco says put the last 7 digits of the vin number into realoem and you can access all parts. As yours is a 1997 could be a M43 1.8 or M44 1.9 engine M43 is single cam and M44 is double cam.

M43 parts are http://www.realoem.com/bmw/enUS/showparts?id=CJ11-EUR-09-1997-Z3-BMW-Z3_18&diagId=11_1393
8.9.and 10
hoses could be
http://www.realoem.com/bmw/enUS/showparts?id=CJ11-EUR-09-1997-Z3-BMW-Z3_18&diagId=11_6180
and
http://www.realoem.com/bmw/enUS/showparts?id=CJ11-EUR-09-1997-Z3-BMW-Z3_18&diagId=11_1513
 
yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
Brian4 said:
As @jonco says put the last 7 digits of the vin number into realoem and you can access all parts. As yours is a 1997 could be a M43 1.8 or M44 1.9 engine M43 is single cam and M44 is double cam.

M43 parts are http://www.realoem.com/bmw/enUS/showparts?id=CJ11-EUR-09-1997-Z3-BMW-Z3_18&diagId=11_1393
8.9.and 10
hoses could be
http://www.realoem.com/bmw/enUS/showparts?id=CJ11-EUR-09-1997-Z3-BMW-Z3_18&diagId=11_6180
and
http://www.realoem.com/bmw/enUS/showparts?id=CJ11-EUR-09-1997-Z3-BMW-Z3_18&diagId=11_1513
Click to expand...
hi, just typed my vin in there and its m44...if hose number 12 is not used for m44, what do other owners have going into the y shape connector?
 
yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
Vehicle Identification Number


Type

CH72

Model

Z3 - EUR

Development Code

E36 (7)

Chassis

ROADST

Steering

RL

Doors

2

Engine

M44

Displacement

1.90

Power

103

Drivetrain

HECK

Transmission

MECH

Color

Cosmosschwarz Metallic - 303

Upholstery

Leder Oregon/schwarz - Q2SW

Production Plant

SPARTANBURG

Production Date

1997-03-10
 
Brian4

Brian4

Zorg Guru (IV)
British Zeds
East Anglian Crew
Joined
Dec 23, 2011
Points
173
Location
Near Grantham
Model of Z
Z3 3.0i Auto
jonco

jonco

Zorg Guru (IV)
Supporter
British Zeds
The M44 Massive
Joined
Dec 6, 2011
Points
159
Location
Chester
Model of Z
'98 1.9 Auto
I'll have to have a look at the back of my engine to check but the confusion may be the 'cold climate option' i.e hose 11 .
It appears that one of the hoses off the Y piece is hose 11 which is the `jacketing heater' for the gases from the rocker cover. It is designed to stop gases condensing and freezing in cold climates - well that is my understanding ;)
 
yorky

yorky

Dedicated Member
British Zeds
Joined
Apr 20, 2016
Points
29
Location
MK bucks
Model of Z
1.9
jonco said:
I'll have to have a look at the back of my engine to check but the confusion may be the 'cold climate option' i.e hose 11 .
It appears that one of the hoses off the Y piece is hose 11 which is the `jacketing heater' for the gases from the rocker cover. It is designed to stop gases condensing and freezing in cold climates - well that is my understanding ;)
Click to expand...
this is all new to me, having just got the car, but to add to a bit more confusion part 1 from your hose link looks nothing like the shape and size of my one. [you can see the hose in my original pic at the begining of this post] will have to disconnect mine from the dash bulkhead end and see if theres any detailed pics of the part numbers to compare . the hose is hanging loose now anyway until i get the new connector part.
 
You must log in or register to reply here.
Top